Brultech Greeneye Monitor User Manual download pdf (Page 18)

Connect a PC to the GEM via Network

CONNECT A PC TO THE GEM VIA NETWORK

Now that the GEM is connected to the local network, a PC may now connect to the same network and

access the GEM to perform one or more of the following:

 Upgrade the GEM firmware (if required)

 Configure or modify the GEM settings

 Change the communication module’s settings

DISCOVERING THE GEM’S IP ADDRESS

If a “Static” IP address was assigned to the GEM, then this will be the GEM’s IP address and this section

may be skipped.

The simplest method of determining the GEM’s IP address on the network is to use the “GEM Network

Utility” software (version 4.2 or higher). Other methods may be used such as:

 Accessing the router’s configuration page and reviewing all connected device IP addresses

 Using software utility such as “Netscan” (free downloadable)

Discovery Using GEM Network Utility

If you have not already downloaded and installed the “GEM Network Utility” software, do so now. This

application is downloadable from http://brultech.com/software/

Figure 17

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

No comments

Brultech Greeneye Monitor User Manual Page 18