Connect a PC to the GEM via Network
© Brultech Research Inc. 20 www.brultech.com
Figure 22
A GEM with “COM” firmware version older than “ver 2.18” will only display partial information after
clicking “Get GEM Info” as shown in Figure 22. Notice in this example that the older version is COM ver
1.81. It does not display hardware information and baud rate. Furthermore the displayed ENG firmware
version is improper. This is normal and proper results will be obtained once the firmware is upgraded.
If the firmware requires upgrading, refer to chapter “Upgrading GEM Firmware (Optional)” on page 24.
Comments to this Manuals